ZLDS210 are a Unique Series of Laser Scanners Performing Profile Measurement in 2D.

The ZLDS210 series are laser scanners of the Flying Spot type developed for the need of 2D profile measurement in any kind of industrial application.
The Flying Spot principle use a single spot instead of a laser line. This makes it possible to have measurement ranges up to 1300 mm.

The ZLDS210 Seires covers 8 different measuring ranges. The smallest is 100 mm and largest is 1300 mm. The resolution varies from 0.03 mm to 0.8 mm. The smaller the measuring range is, the better the resolution will be. ZLDS210 models are available with measuring frequencies of 2 kHz or 6 kHz.

The sensors are intended for non-contact measuring and checking of position, displacement, dimensions, surface ' profile,deformation, vibrations, sorting and sensing of technological objects as well as for measuring levels of liquid and bulk materials.

The series includes a series of sensors with the measurement range, from 2 to 2500 mm and the base distance from 10 to 420 mm. Custom-ordered configurations are possible with parameters different from those shown below.
ZLDS100 — universal sensors with 2 to 1250 mm operating ranges.
ZLDS100/HS — high speed sensors;
ZLDS100RD — specialized laser sensors for pavement profile and texture measurement;
ZLDS101 — large-base and long range sensors;
ZLDS102 — compact sensors;
ZLDS103 — super compact sensors.

ZLDS11X sensors are optical displacement measuring devices for non contact precision measurement of distance or thickness, width and difference .

The series includes seven lines of models:
ZLDS112 - small size sensors
ZLDS113 - Small Measurement Ranges sensors
ZLDS114 - Offering 10 Different Measuring Ranges
ZLDS115 - Longer Measurement Ranges sensors

The ZLDS11X is a compact unit in which optics, sensor, and signal processing electronics are all integrated. The distance to an object is detected by means of the triangulation principle. A focused laser beam forms a spot on the measuring object. The image of the spot is reflected onto a position detector, a CCD camera, and the ZLDS11X converts this position into the distance to the object by advanced mathematical procedures.

The output signal is provided in 3 different manners. One digital output, an RS232 or RS422 serial output, provides the distance to the object with a frequency of 1000, 2000, 5000 or 10000 Hz acording to Model. At the same time two analog outputs deliver the measured distance, one as a 1 - 9 V DC signal and the other as a 4 - 20 mA current loop.